Government College of Engineering, Bargur - GCEB

Government College of Engineering, Bargur is one of the educational institutions developed by Government of Tamil Nadu in the year 1994 to cater to the needs of the nation in the development of technocrats and to provide facilities for educating and training men and women in order to meet the entrepreneurial and management needs.  This GEC started functioning on 9^th September 1994 in two buildings in Government Polytechnic campus, Krishnagiri as a temporary measure and admitted students for EEE and ECE branches only. The College was moved from there to its present Bargur campus in July 2000 when Prof Jameel was Principal I/c.

Government College of Engineering, Bargur is located Madepalli Village on NH46, on a site surrounded by hills, between Vaniyambadi and Krishnagiri  just 4 Kms West of Bargur.   Patchur Railway Station is 29.9 km away and it will take around 30 minutes to reach the college.  Kempegowda International Airport , Bengaluru  is the nearest airport  which  is around 140 km away from the GCE Bargur.  The Bargur Bus Depot is 11.8 km away from the collegeThe college is well connected by all modes of transport.

GEC, Bargur is affiliated to the Anna University, and has been approved by the AICTE. The college is accredited by the National Board of Accreditation (NBA). GCEB is recognised by the University Grants Commission (UGC).

The Tamil Nadu Government has created adequate infrastructural facilities and sufficient funds and is keen on developing the institute for higher education. The Institute offers 4 UG and 3 PG courses for a total of 477 seats.  These programs are offered in Full Time mode.  Government College of Engineering, Bargur is a premier institute for B.E. /B.Tech. and M.E./M.Tech. courses.  Over the period, the college has gained expertise through almost 50 numbers of its trained and experienced faculty in the fields of Computer Science Engineering, Electrical Engineering, Electronics & Communication Engineering, Mechanical Engineering, Electronics Engineering, Power Engineering.   The accepted Entrance Exams are TNEA, CBSE 12^th.  Admission to the college is purely based on merit.  Scholarship opportunities are also provided to deserving and merit students. Final year students are also provided with the placement opportunities.


GCE Bargur has ample facilities for the students, staff and faculty such as cafeteria, hostels, IT infrastructure, library, etc


The college has entered into Collaboration with a number of Corporates like Titan Industries Ltd., Texas Instruments, TCS, Infosys, Campus Connect, Wipro Solution, IIT Delhi, Classle Knowledge Pvt. Ltd., Frontline Electronics, Nafems Indian, Bangalore, Pantech Solutions, Green Power Solution, Gighz Technologies,Tata Technologies, Bangalore, etc for Internship and Placement of its students.

GCE, Bargur is successfully pursuing its mission of professionalizing Indian Engineering through innovative teaching, infrastructure and management. Besides promoting research and disseminating knowledge gained, it fosters cooperation between the academic and industrial communities. Regarded as the sole government engineering institution, this college has always equipped itself with the modern trends in the run for becoming a premier institution in the nearer future.

Government College of Engineering, Bargur is carved into existence with the motto of "Growth and Commitment through Excellence", This college has catered to the aspirations and requirements of the many enthusiastic engineering students. The college is one of top ten Government Engineering Colleges in the state of Tamil Nadu coexisting with nearly 500 plus private engineering colleges.

Why GCE - Bargur ?
GCE Bargur is one of the top engineering institutions in Tamil Nadu, featuring consistently in top ranking, year after year in the Anna University Examinations.
GCE Bargur is one of the most sought after colleges amongst the top ranked students.
Established in the year 1994, by Government of Tamil Nadu, providing very good learning and research environment.
GCEB has a proud tradition of maintaining the highest standards of education with the strong emphasis on curricular, co-curricular and extra-curricular activities
Rated as one of the better performing TEQIP institutions in India.
Rated as one of the top 50 (achieved AA grade) institutions out of 1000+ institutions participated in the NPTEL online examinations conducted by the IITs and IISc.
Students have participated both state level and national competitions and won accolades for the performance.

GCE Bargur Admission Process

Government College of Engineering Bargur offers admission to a total of 8 courses in the field of Engineering and Architecture, Computer Application and IT. For GCE Bargur admission to the B.E courses will be done on the basis of the students performance in 10+2 examination. Further, the shortlisted candidates have to appear for a TNEA counselling process and seats will be allotted on the basis of merit. Admission to the M.E courses will be done on the basis of entrance examination (GATE/TANCET) followed by a TANCA counselling process. Students can check the details of Government College of Engineering Bargur admission process given below:

GCE Bargur Application Process

·         Visit the official website of Government College of Engineering Bargur.

·         Fill the application form with all the necessary documents.

·         Scan and upload the documents.

·         Submit the documents and pay the application fees.

GCE Bargur Admission Procedure for UG Courses

Total 5 undergraduate courses are offered by the Government College of Engineering Bargur. B.E courses are offered in both full-time and part-time mode. The duration of the courses is 4 years and is divided into 8 semesters.

Government College of Engineering Bargur Eligibility Criteria

GCE Bargur B.E Admission Process

·         Candidates have to meet the eligibility criteria.

·         A merit list will be prepared by DOTE and the cutoff will be released based on the marks of Physics, Chemistry and Mathematics in 10+2.

·         Candidates whose names are on the merit list have to register for a TNEA counselling.

·         To participate in the counselling, candidates have to register and give preference to GCE Bargur.

·         Seats will be allotted based on merit, category of the candidates and preference filled.

·         Finally, candidates need to submit the documents and pay the fees to confirm the seats.

GCE Bargur Admission Process for PG Courses

The college offers a total of 3 postgraduate  courses in the field of Computer Science and Engineering, Applied Electronics, and Power Electronics and Drives. All three courses are offered in full-time mode.

Government College of Engineering Bargur Courses, Fees and Eligibility Criteria

GCE Bargur M.E Admission Process

·         Students have to appear for the TANCET examination conducted by Anna University.

·         GATE qualified candidates are exempted from the entrance test.

·         Merit list will be prepared by the authorities.

·         Shortlisted candidates have to register and appear for TANCA counselling, conducted by Anna University.

·         While registering for counselling, candidates have to select GCE Bargur as their preference.

·         Finally, after the seat allotment, candidates have to submit the documents and pay the fees.

GCE Bargur M.E Admission Documents Required

·         Qualifying examination marksheets

·         Entrance exam scorecard

·         ID proof

·         Migration/Transfer certificate

·         Passport size photographs

GCE Bargur Placements

The following scholarship are awared by Government and other Agencies to deserving students. The details are as follows:

NOTE : All  first  Graduates  are  exempted  from  paying  tuition  fees. All  SC/ST  students  are  exempted  from  payment  of  Tuition Fee
irrespective  of  Parent’s  annual  income  (G.O. Ms. No. 722 Social Welfare Department dt.  13-10-1977)

SCHOLARSHIP FOR PG STUDENTS:

       The scholarship of amount Rs.6000/- per month is provided by Government of Tamilnadu for PG students (First top 300 TANCET Scores) admitted in Anna University, Anna University Constituent Colleges, Government and Government Aided Colleges in Tamilnadu.

GCE Bargur Facilities

College Bus facilities are provided form various destination to ensure safe and comfortable journey and time management .Car facility also available for the students to take them to the hospitals in case of emergency.